Die Casting Mold Release Agent
In addition to the die-casting industrial furnace, we also provide the consumables needed by the furnace, including crucible, thermocouple, heating ring, refractory brick, thermal insulation cotton, etc.
Specification:20L/200L
Model:DC-1188/2188/9150/6250/9108
Die Casting Mold Release Agent
Features:
We are professional in die casting and chemistry, and after more than 20 years of application research, die casting release agent from quality and economic performance are widely trusted and recognized. About 70% of the raw materials, such as synthetic wax, synthetic oil, modified siloxane and emulsifier, are from Germany, USA, and some of the raw materials are from domestic first-class enterprises.
Physical and chemical index: unlimited miscible in water (water-soluble), milky white liquid (droplet polarized light blue), no flash point, aromatic taste, PH8.0-PH9.0, density 0.96-0.97g/cm3
Method of use
- Using tap water dilution (do not use well water dilution), manual slight stirring even (use automatic proportioning machine, do not use uninterrupted compressed air stirring), note: above 2 prohibited, will cause release agent "demulsification aggregation ";
- Adopt only spray gun or automatic spraying system, spray evenly and blow dry to ensure casting quality;
- The optimum use of mold release agent is between 200°C and 300°C.
- Dilution ratio: according to the casting complexity, die depth ratio, aluminum alloy Si content, zinc alloy and other different circumstances to make appropriate adjustments.
Die casting release agent
Packing Specification :20kg ,200kg Barrel
Reference dilution ratio
Medium and small castings, zinc alloy dilution ratio :1:100~1:120;
Large complex parts, deep cavity mold dilution ratio :1:80-1:100;
The dilution ratio of pure aluminum and low Si aluminum alloy is 1:50~1:60;
Notes
Attention to custody: anti-freezing sunscreen, indoor custody, after opening attention to seal cover.
The shelf life is 6 months for the liquid seal
Emergency treatment: If leakage, clean with water
Die Casting Mold Release Agent Specification List | |||
Series of Products | Main ingredients | Product Uses and Characteristics | |
1 | DC-1188 | Synthetic grease wax | Silicon free type, suitable for medium and small die castings below 280T |
2 | DC-1188-2 | Silicone wax | Bright, suitable for medium complex under 500T |
3 | General type | Synthetic grease wax | Silicon free type, suitable for medium complex under 500T |
4 | DC-2188 | Synthetic oil silicone wax | Bright, suitable for medium complex under 500T |
5 | DC-3188 | Silicone wax | Suitable for high temperature die castings such as pure aluminum with silicone oil, poor coating, good brightness and high dilution ratio |
6 | DC-6150 | Modified silicon wax | High temperature resistance, comprehensive performance, suitable for medium and large die casting |
7 | DC-6150-2 | Modified silicon wax | High temperature resistance, good brightness, suitable for medium and large die casting |
8 | DC-6250 | Modified silicon wax | High temperature resistance, comprehensive performance, suitable for large and medium complex parts |
9 | DC-6250-2 | Modified silicon wax | High temperature resistance, good brightness, suitable for large and medium complex parts |